How to Use Your Shapers & Inserts

Every Shapers Image insert goes in the same easy way: tuck it in, press it flat, wear it with pride. Find your cap below, watch the short video (no sound needed) and follow the three steps.

Jump to: Baseball caps · Trucker and mesh caps · Flat caps · Military caps · Sun and bucket hats · Care

Baseball caps

CapPro Crown Insert (Fitted & Snapback)

How to place it:

1. Slide your Shapers Image insert between the sweatband and the inner front panels of your cap.
2. Press it gently into the crown so it follows the curve and sits snug and seamless. Level it, and forget it’s there.
3. Wear it all day, then leave it in to store or pack your cap.

Shop the CapPro Crown Insert

CapPro Low Profile Insert (Dad Caps & Low Profile)

How to place it:

1. Slide your Shapers Image insert between the sweatband and the inner front panels of your cap.
2. Press it gently into the crown so it follows the curve and sits snug and seamless. Level it, and forget it’s there.
3. Wear it all day, then leave it in to store or pack your cap.

Shop the CapPro Low Profile Insert

Wraparound Crown Insert

How to place it:

1. Slide your Shapers Image insert between the sweatband and the inner panels of your cap, starting at the center front.
2. Curve it around to each side so it follows the crown, and press it gently until it sits snug and seamless. Level it, and forget it’s there.
3. Wear it all day, then leave it in to store or pack your cap.

Shop the Wraparound Crown Insert

Baseball Cap Web Shaper

How to place it:

1. Open your Shapers Image web shaper and slide it inside your cap, between the sweatband and the inner panels, so the web fills the dome and crown.
2. Press it gently so it follows the curve of every panel and sits snug and seamless. Level it, and forget it’s there.
3. Wear it all day, then leave it in to store or pack your cap.

Shop the Web Shaper

CapForm Pro Dome Panel Combo, part 1: the crown piece

How to place it:

1. Slide the Shapers Image crown piece between the sweatband and the inner front panels of your cap.
2. Press it gently into the crown so it follows the curve and sits snug and seamless. Level it, and forget it’s there.
3. Wear it all day, then leave it in to store or pack your cap.

Shop the CapForm Pro Dome Panel Combo

CapForm Pro Dome Panel Combo, part 2: the dome piece

How to place it:

1. With the crown piece in place, slide the Shapers Image dome piece inside your cap so it fills the dome.
2. Press it gently up against the panels so it follows the curve and sits snug and seamless. Level it, and forget it’s there.
3. Turn the cap over: every panel stands tall. Wear it, store it, pack it.

Shop the CapForm Pro Dome Panel Combo

#1 Team Visor Insert

How to place it:

1. Slide your Shapers Image insert onto the visor of your cap, centered over the bill.
2. Press it gently so it follows the curve of the visor and sits snug and seamless. Level it, and forget it’s there.
3. Wear it all game, then leave it on to store or pack your cap.

Shop the #1 Team Visor Insert

Trucker and mesh caps

MeshPro Insert for Trucker Caps (large)

How to place it:

1. Slide your Shapers Image insert between the sweatband and the inner front panel of your cap.
2. Press it gently into the crown so it follows the curve and sits snug and seamless. Level it, and forget it’s there.
3. Wear it all shift, then leave it in to store or pack your cap.

Shop the MeshPro Insert

Smaller mesh, designer and running caps

How to place it:

1. Slide your Shapers Image insert between the sweatband and the inner front panel of your cap.
2. Press it gently into the crown so it follows the curve and sits snug and seamless, then fasten the hook-and-loop strip. Level it, and forget it’s there.
3. Wear it all day, then leave it in to store or pack your cap.

Shop the Petite Crown Insert

Flat caps

Flat CapPro Web Shaper

How to place it:

1. Open your Shapers Image web shaper and slide it inside your flat cap, between the sweatband and the inner panels, so the web fills the dome and crown.
2. Press it gently so it follows the curve and sits snug and seamless. Level it, and forget it’s there.
3. Wear it all day, then leave it in to store or pack your cap.

Shop the Flat CapPro Web Shaper

Flat CapPro Dome Panel & Visor Combo

How to place it:

1. Slide your Shapers Image shaper inside your flat cap, between the sweatband and the inner panels, so it fills the dome and crown and runs forward over the visor.
2. Press it gently so it follows the curve and sits snug and seamless. Level it, and forget it’s there.
3. Wear it all day, then leave it in to store, pack or hand wash your cap.

Shop the Flat CapPro Dome Panel Combo

Military caps

Military CapForm Pro Dome Shaper

How to place it:

1. Slide your Shapers Image shaper inside your cap, between the sweatband and the inner panels, so it fills the dome and crown, with or without your cap’s grommet.
2. Press it gently so it follows the curve and sits snug and seamless. Level it, and forget it’s there.
3. Wear it on duty, then leave it in to store, pack or hand wash your cap.

Shop the Military CapForm Pro Combo

MilitaryPro Half Cap Insert

How to place it:

1. Slide your Shapers Image insert between the sweatband and the inner front panels of your cap, with the grommet for full support or without it for a lighter, softer feel.
2. Press it gently into the crown so it follows the curve and sits snug and seamless. Level it, and forget it’s there.
3. Wear it on duty, then leave it in to store or pack your cap.

Shop the MilitaryPro Half Cap Insert

Military Wraparound Insert (in the Military Multipack)

How to place it:

1. Slide your Shapers Image insert between the sweatband and the inner panels of your cap, starting at the center front.
2. Curve it around to each side so it follows the crown, and press it gently until it sits snug and seamless. Level it, and forget it’s there.
3. Wear it on duty, then leave it in to store or pack your cap.

Shop the Military Multipack

Sun and bucket hats

Premium Sun Hat Shape Enhancer

How to place it:

1. Slide your Shapers Image shaper inside your hat, between the sweatband and the inner panels, so it fills the dome and crown.
2. Press it gently so it follows the curve and sits snug and seamless. Level it, and forget it’s there.
3. Wear it all day, then leave it in to store, pack or hand wash your hat.

Shop the Sun Hat Shape Enhancer

Shaper care and cap care

Your Shapers Image shaper: wipe it with mild soap, rinse and air dry. Keep it away from dryer heat.

Your cap: wash it only if the tag says it is washable. See How to Hand Wash a Cap for the steps and the care disclaimer.

Free US shipping over $35 · Under $35, flat $5.99 · Ships in 1–2 business days · 30-day satisfaction guarantee.

Shop all Shapers Image shapers Questions? Contact us