Skip to content
Shapers Image · Free US shipping on orders over $35 · International shipping available · Proudly Made in the USA
Trucker caps · Wear · Store · TravelMeshPro Insert — Trucker & Mesh Caps

Mesh in the back. Business in the front. Built tough, shift after shift.

Comes in 4, 8 or 12 pieces · Size: for 5-Panel Caps

Shapers Image MeshPro Cap Insert for Trucker and Baseball Mesh Caps

$14.99
Rating: 5.0 out of 5
Select Color
Select Quantity
Choose how many pieces
Buying two? 20% off your second insert comes off automatically at checkout. One discount per order, never combined.
  • Proudly Made in the USAMade in USA
  • Free US shipping over $35Free ship $35+
  • 30-day satisfaction guarantee30-day guarantee
  • Ships in 1–2 business daysShips in 1–2 days

Watch how it fits

It takes seconds. No tools needed.

All how-to videos

Mesh in the back. Business in the front. Shapers Image has it covered.

The foreman's thermos was still hot when he reached the truck. Sawdust on the seat, sun on the dash, one good shift behind him and another ahead. He took off his cap and grinned at it: broken in just right, a cap that has seen honest work. Next morning it went back on with a MeshPro Insert tucked inside, and it stood tall through the sawdust, the sun and a tailgate that ran past dark. Nobody on the crew said a word. They just wondered why his cap always looked like it came off the shelf that morning.

The MeshPro Insert from Shapers Image is made for 5-panel trucker and netback caps. It slides in behind the front crown panel and holds it tall and proud while the mesh does what mesh does best. Thin, light and built tough, it keeps its shape shift after shift, so a hard-working cap keeps looking like one.

Slide it in, press it into the curve and get back to work. By lunch you will not know it is there. Everyone else will just wonder why your cap still looks so sharp. Great hats stay great, and a trucker cap that works this hard deserves to.

Size: 7 7/8 in long x 3 3/4 in high (20 x 9.5 cm).

Why hard workers swear by it

  • Made for 5-panel trucker and netback caps: Cut to fit the front crown panel of mesh-back caps, so it sits where it should and stays there.
  • Heat-Release Design: The contoured shape leaves open space so heat can escape. Your mesh back keeps doing its job, and the insert plays nice up front.
  • Just the right firmness: Firm enough to hold your cap's shape, flexible enough to stay comfortable from the first coffee to the last load.
  • Light, thin, smooth: It won't rub or chafe your forehead, even on a double shift.
  • Built tough: Keeps its shape shift after shift, week after week, cap after cap.
  • Wear it, then pack it: Wear it all shift, then leave it in to store your cap in the truck, the shop or the suitcase.
  • Easy to clean: Wipe with mild soap, rinse, air dry, and reuse it for life.
  • Proudly Made in the USA: From a woman-owned American company that respects honest work.

Is it right for your cap?

If your cap has a mesh back and five panels, this is the one. Smaller 6-panel, designer or running cap? Reach for the Petite Crown Insert. Solid-back baseball cap? The CapPro Crown Insert has you covered. Not sure which is which? Crown Match sorts it out in two questions.

A cap that does real work earns a good clean now and then. Check the tag first: if it says washable, hand wash only (never the machine), and leave the insert in while it air dries so the crown dries in shape. The whole routine is in our guide, how to hand wash a cap.

See how it works: instruction video

Long days need tough gear. Order your MeshPro from Shapers Image and keep your cap working as hard as you do. Keep your crown. Stay shaped.
Ships in 1–2 business days · 30-day satisfaction guarantee · Free US shipping over $35 · Proudly Made in the USA · Woman-owned

Trucker cap with MeshPro insertMeshPro insert for trucker caps

Fits these caps
  • 5-panel trucker caps
  • Netback and mesh-back caps
  • Size: 7 7/8 × 3 3/4 in (20 × 9.5 cm)
  1. Slide your Shapers Image insert between the sweatband and the inner front panel of your cap.
  2. Press it gently into the crown so it follows the curve and sits snug and seamless. Level it, and forget it’s there.
  3. Wear it all shift, then leave it in to store or pack your cap.

Watch the 30-second how-to video

Wipe your Shapers Image shaper with mild soap, rinse and air dry. Keep it away from dryer heat and heat presses.

Every Shapers Image shaper is soft, flexible, lightweight foam. Waterproof, hypoallergenic and non-toxic. Proudly made in the USA.

Orders ship in 1–2 business days. Free US shipping on orders over $35; under $35 it is a flat $5.99. International orders of $99 or more ship free. Duties and taxes, if any, are the buyer’s responsibility, so check your country’s rules.

30-day satisfaction guarantee: return unused items in their original packaging within 30 days for a full refund. Each item must come back complete, with every piece that came in it. Sale items are final sale.

Discounts: one discount per order, never combined. Free shipping is the only offer that applies together with a code. Shipping policy · Refund policy

If your cap has five panels and a mesh back, yes. The MeshPro measures 7 7/8 in long by 3 3/4 in high and sits behind the front crown panel. Smaller 6-panel, designer or running cap? Grab the Petite Crown Insert instead.

It is light, thin and smooth with no edges to rub or chafe, so most people forget it is there before the first break. The best insert is the one you stop noticing, and this one is built to disappear, even on a double shift.

Not on purpose. The Heat-Release Design leaves open space so heat can escape, and your mesh back keeps doing its job. Your cap holds its shape and your head stays comfortable out on the job site.

Both. Wear it through the whole shift, then leave it in to store your cap in the truck, the shop or the suitcase. It works as hard as you do, from the first coffee to the last load.

One per cap is the cleanest plan, so every cap gets its own. If your trucker caps live in rotation, The Rotation (the 6-pack) covers the whole lineup, from the daily work cap to the weekend cap that has to look right at the ranch or the game.

Only if the tag says it is washable. Never wash collectible caps or caps with a cardboard visor. Hand wash and air dry with your Shapers Image shaper in; never use a washing machine or dryer. Full steps are in our guide, How to Hand Wash a Cap.

MeshPro Insert — Trucker & Mesh Caps $14.99
5 / 5

Pairs well with

Go to top Top Dadao proudct review Shopify review