Mesh in the back. Business in the front. Built tough, shift after shift.
Inserto Shapers Image MeshPro para gorras trucker y gorras de béisbol con malla
- Proudly Made in the USAMade in USA
- Free US shipping over $35Free ship $35+
- 30-day satisfaction guarantee30-day guarantee
- Ships in 1–2 business daysShips in 1–2 days
Malla atrás. Seriedad al frente. Shapers Image lo tiene cubierto.
El termo del capataz todavía estaba caliente cuando llegó a la camioneta. Aserrín en el asiento, sol en el tablero, un buen turno detrás y otro por delante. Se quitó la gorra y le sonrió: gastada justo como debe ser, una gorra que conoce el trabajo honesto. A la mañana siguiente volvió a ponérsela con un inserto MeshPro dentro, y se mantuvo erguida entre el aserrín, el sol y una reunión en la caja de la camioneta que se alargó hasta la noche. Nadie del equipo dijo nada. Solo se preguntaban por qué su gorra siempre parecía recién sacada del estante esa misma mañana.
El inserto MeshPro de Shapers Image está hecho para gorras trucker y de malla de 5 paneles. Se desliza detrás del panel frontal de la corona y lo mantiene erguido y orgulloso mientras la malla hace lo que mejor sabe hacer. Delgado, ligero y resistente, conserva su forma turno tras turno, para que una gorra trabajadora siga luciendo como tal.
Deslízalo, presiónalo para que siga la curva y vuelve al trabajo. Para la hora del almuerzo ya no sabrás que está ahí. Los demás solo se preguntarán por qué tu gorra sigue luciendo tan impecable. Las gorras geniales siguen siendo geniales, y una gorra trucker que trabaja así de duro se lo merece.
Tamaño: 7 7/8 pulg. de largo x 3 3/4 pulg. de alto (20 x 9.5 cm).
Por qué los que trabajan duro confían en él
- Hecho para gorras trucker y de malla de 5 paneles: Cortado para encajar en el panel frontal de la corona de las gorras con malla atrás, así que se queda donde debe y no se mueve.
- Diseño que libera el calor: La forma contorneada deja espacio abierto para que el calor pueda escapar. La malla de atrás sigue haciendo su trabajo, y el inserto se porta bien al frente.
- La firmeza justa: Lo bastante firme para mantener la forma de tu gorra, lo bastante flexible para seguir cómodo desde el primer café hasta la última carga.
- Ligero, delgado, suave: No roza ni irrita tu frente, ni siquiera en un doble turno.
- Resistente: Conserva su forma turno tras turno, semana tras semana, gorra tras gorra.
- Úsalo y luego empácalo: Úsalo todo el turno y luego déjalo puesto para guardar tu gorra en la camioneta, el taller o la maleta.
- Fácil de limpiar: Límpialo con jabón suave, enjuágalo, déjalo secar al aire y reutilízalo de por vida.
- Orgullosamente hecho en EE. UU.: De una empresa estadounidense propiedad de una mujer que respeta el trabajo honesto.
¿Es el indicado para tu gorra?
Si tu gorra tiene malla atrás y cinco paneles, este es el tuyo. ¿Gorra más pequeña de 6 paneles, de diseñador o para correr? Elige el Petite Crown Insert. ¿Gorra de béisbol sin malla? El CapPro Crown Insert te tiene cubierto. ¿No sabes cuál es cuál? Crown Match lo resuelve en dos preguntas.
Una gorra que hace trabajo de verdad se gana una buena limpieza de vez en cuando. Revisa primero la etiqueta: si dice que es lavable, lávala solo a mano (nunca en la lavadora) y deja el inserto puesto mientras se seca al aire para que la corona se seque con su forma. Toda la rutina está en nuestra guía, cómo lavar una gorra a mano.
Mira cómo funciona: video de instrucciones
Los días largos piden equipo resistente. Pide tu MeshPro de Shapers Image y haz que tu gorra trabaje tan duro como tú. Conserva tu corona. Mantén la forma.
Se envía en 1–2 días hábiles · Garantía de satisfacción de 30 días · Envío gratis en EE. UU. en pedidos de más de $35 · Orgullosamente hecho en EE. UU. · Empresa propiedad de una mujer


- 5-panel trucker caps
- Netback and mesh-back caps
- Size: 7 7/8 × 3 3/4 in (20 × 9.5 cm)
- Slide your Shapers Image insert between the sweatband and the inner front panel of your cap.
- Press it gently into the crown so it follows the curve and sits snug and seamless. Level it, and forget it’s there.
- Wear it all shift, then leave it in to store or pack your cap.
Wipe your Shapers Image shaper with mild soap, rinse and air dry. Keep it away from dryer heat and heat presses.
Every Shapers Image shaper is soft, flexible, lightweight foam. Waterproof, hypoallergenic and non-toxic. Proudly made in the USA.
Orders ship in 1–2 business days. Free US shipping on orders over $35; under $35 it is a flat $5.99. International orders of $99 or more ship free. Duties and taxes, if any, are the buyer’s responsibility, so check your country’s rules.
30-day satisfaction guarantee: return unused items in their original packaging within 30 days for a full refund. Each item must come back complete, with every piece that came in it. Sale items are final sale.
Discounts: one discount per order, never combined. Free shipping is the only offer that applies together with a code. Shipping policy · Refund policy
If your cap has five panels and a mesh back, yes. The MeshPro measures 7 7/8 in long by 3 3/4 in high and sits behind the front crown panel. Smaller 6-panel, designer or running cap? Grab the Petite Crown Insert instead.
It is light, thin and smooth with no edges to rub or chafe, so most people forget it is there before the first break. The best insert is the one you stop noticing, and this one is built to disappear, even on a double shift.
Not on purpose. The Heat-Release Design leaves open space so heat can escape, and your mesh back keeps doing its job. Your cap holds its shape and your head stays comfortable out on the job site.
Both. Wear it through the whole shift, then leave it in to store your cap in the truck, the shop or the suitcase. It works as hard as you do, from the first coffee to the last load.
One per cap is the cleanest plan, so every cap gets its own. If your trucker caps live in rotation, The Rotation (the 6-pack) covers the whole lineup, from the daily work cap to the weekend cap that has to look right at the ranch or the game.
Only if the tag says it is washable. Never wash collectible caps or caps with a cardboard visor. Hand wash and air dry with your Shapers Image shaper in; never use a washing machine or dryer. Full steps are in our guide, How to Hand Wash a Cap.
Pairs well with
-
Petite Crown Insert — Designer & Running Caps Smaller caps · Wear · Store · Travel From $14.99· 4 piecesPacks of 4, 8 or 12 · as low as $2.99 each

-
CapPro Crown Insert — Fitted & Snapback Baseball caps · Wear · Store · Travel From $15.99· 4 piecesPacks of 4, 8 or 12 · as low as $3.16 each

-
Web Shaper — Full Dome & Crown Baseball caps · Wear · Store · Travel From $19.99· 2 piecesPacks of 2, 4 or 6 · as low as $6.66 each

Ships in 1–2 Business Days
Your Shapers Image order leaves our shop fast, ready for game day, duty or the weekend getaway.
Free US Shipping Over $35
Stock up for the whole rotation and shipping is on us.
30-Day Satisfaction Guarantee
Not happy? Return unused items in their original packaging within 30 days.
Join the Shapers. Honor your image.
First dibs on new Shapers Image shapers, cap-care tips that actually work, and 10% off your first order.
Shapers Image® makes hat shapers and crown inserts that keep your caps looking the way they did on day one: thin, soft, light enough to wear all day, and firm enough to hold the crown. Proudly Made in the USA. A proudly woman-owned American company.


















