Built for the tall ones: side-to-side crown support for high-crown caps.
Comes in 2, 4, 6 or 12 pieces
Inserto de corona Shapers Image Wraparound para gorras de béisbol de corona alta
- Proudly Made in the USAMade in USA
- Free US shipping over $35Free ship $35+
- 30-day satisfaction guarantee30-day guarantee
- Ships in 1–2 business daysShips in 1–2 days
Hecho para las altas, por Shapers Image.
Algunas gorras entran a un lugar antes que tú. Una corona alta tiene esa clase de presencia, y la tuya se ha ganado cada centímetro. El inserto de corona Wraparound de Shapers Image se curva alrededor de todo el frente de la gorra y sostiene la corona de lado a lado, para que la izquierda, la derecha y el centro se mantengan erguidos juntos. Un inserto solo frontal cuida el centro. Este da la vuelta completa. Las gorras altas merecen un respaldo que las envuelva, y tu gorra recibe justo eso. Las gorras geniales siguen siendo geniales.
El inserto de corona Wraparound se curva alrededor de todo el frente de tu gorra de béisbol de corona alta y sostiene la corona de lado a lado, para que se mantenga erguida desde el primer lanzamiento hasta el jonrón de la victoria. Líneas limpias, forma estable y una corona que luce igual de bien al final del día que al principio.
Es delgado, ligero y suave, así que puedes usarlo todo el día y olvidarte de que está ahí. Tu gorra conserva su porte. Tú conservas tu buen humor. Ya sea que colecciones gorras de corona alta o simplemente ames la que usas todos los días, este inserto de corona le da una columna vertebral discreta y confiable.
Por qué les encanta a los fans de las coronas altas
- Soporte envolvente: Sigue la corona de lado a lado, para que cada parte de la corona tenga respaldo.
- Diseño que libera el calor: La forma contorneada deja espacio abierto para que el calor pueda escapar. Corona alta, cabeza cómoda.
- La firmeza justa: Lo bastante firme para mantener la forma de tu gorra, lo bastante flexible para la comodidad de todo el día en cualquier gorra y cualquier cabeza.
- Ligero, delgado, suave: No roza ni irrita tu frente, y te olvidarás de que está ahí.
- Pasa desapercibido o destaca: Combínalo con tu gorra para un acabado invisible, o mezcla colores por diversión.
- Úsalo, y luego empácalo y guárdalo con él: Úsalo todo el día y luego déjalo puesto cuando tu gorra vaya al estante o a la maleta.
- Fácil de limpiar: Límpialo con jabón suave, enjuágalo, déjalo secar al aire y reutilízalo de por vida.
- Orgullosamente hecho en EE. UU.: De una empresa estadounidense propiedad de una mujer que cuida hasta el último detalle.
¿Es el indicado para tu gorra?
Si tu gorra tiene corona alta, o usas gorras fitted y snapbacks de tallas grandes, este es tu inserto. ¿Gorra más pequeña? Echa un vistazo al Petite Crown Insert, hecho para ellas. ¿Quieres soporte para toda la cúpula además de la corona? Ese es trabajo para el Web Shaper. ¿No estás seguro? Crown Match lo resuelve en dos preguntas.
Úsalo y luego déjalo puesto para guardar tu gorra o llevarla de viaje. Cuando llegue la hora del baño, revisa primero la etiqueta y luego sigue nuestra guía sobre cómo lavar una gorra a mano.
Mira cómo funciona: video de instrucciones
Las coronas altas merecen un respaldo serio. Agrega el inserto de corona Wraparound de Shapers Image a tu carrito y deja que tu gorra se mantenga en alto. Conserva tu corona. Mantén la forma.
Se envía en 1–2 días hábiles · Garantía de satisfacción de 30 días · Envío gratis en EE. UU. en pedidos de más de $35 · Orgullosamente hecho en EE. UU. · Empresa propiedad de una mujer


- High-crown baseball caps
- Larger fitted caps and snapbacks
- Slide your Shapers Image insert between the sweatband and the inner panels of your cap, starting at the center front.
- Curve it around to each side so it follows the crown, and press it gently until it sits snug and seamless. Level it, and forget it’s there.
- Wear it all day, then leave it in to store or pack your cap.
Wipe your Shapers Image shaper with mild soap, rinse and air dry. Keep it away from dryer heat and heat presses.
Every Shapers Image shaper is soft, flexible, lightweight foam. Waterproof, hypoallergenic and non-toxic. Proudly made in the USA.
Orders ship in 1–2 business days. Free US shipping on orders over $35; under $35 it is a flat $5.99. International orders of $99 or more ship free. Duties and taxes, if any, are the buyer’s responsibility, so check your country’s rules.
30-day satisfaction guarantee: return unused items in their original packaging within 30 days for a full refund. Each item must come back complete, with every piece that came in it. Sale items are final sale.
Discounts: one discount per order, never combined. Free shipping is the only offer that applies together with a code. Shipping policy · Refund policy
No. It is made for larger, high-crown baseball caps. For smaller caps, the Petite Crown Insert is the one you want, and it is built to give small crowns the same loving support. Match the insert to the crown, and everyone wins.
It supports the crown, from side to side. For full dome and crown support while you wear your cap, see the Web Shaper, which holds every panel from the inside like an arch. Together, the two cover the front and the whole dome, so pick the one that suits your cap.
High-crown baseball caps, plus larger fitted caps and snapbacks. If your cap stands tall and you want it to keep that proud posture, you are in the right place, and Crown Match can confirm it in two quick questions.
No. It is firm enough to hold your cap's shape and flexible enough for all-day comfort on any cap and any head. It is also light, thin and smooth, so it won't rub or chafe your forehead.
Yes, and you should. Leave it in on the shelf or in the suitcase and your cap arrives with its posture intact, ready to wear the moment you unpack. Tall crowns travel best with company.
Only if the tag says it is washable. Never wash collectible caps or caps with a cardboard visor. Hand wash and air dry with your Shapers Image shaper in; never use a washing machine or dryer. Full steps are in our guide, How to Hand Wash a Cap.
Pairs well with
-
Web Shaper — Full Dome & Crown Baseball caps · Wear · Store · Travel From $19.99· 2 piecesPacks of 2, 4 or 6 · as low as $6.66 each

-
CapPro Crown Insert — Fitted & Snapback Baseball caps · Wear · Store · Travel From $15.99· 4 piecesPacks of 4, 8 or 12 · as low as $3.16 each

-
CapForm Pro Dome Combo — Baseball Caps Baseball caps · Wear · Store · Travel From $23.99· 3 piecesPacks of 3, 4 or 6 · as low as $6.66 each

Ships in 1–2 Business Days
Your Shapers Image order leaves our shop fast, ready for game day, duty or the weekend getaway.
Free US Shipping Over $35
Stock up for the whole rotation and shipping is on us.
30-Day Satisfaction Guarantee
Not happy? Return unused items in their original packaging within 30 days.
Join the Shapers. Honor your image.
First dibs on new Shapers Image shapers, cap-care tips that actually work, and 10% off your first order.
Shapers Image® makes hat shapers and crown inserts that keep your caps looking the way they did on day one: thin, soft, light enough to wear all day, and firm enough to hold the crown. Proudly Made in the USA. A proudly woman-owned American company.
















