Your cap has rank. Treat it that way. Three pieces, zero slack.
One set of 3 inserts: dome, crown and wraparound
Shapers Image Military Multipack: insertos de cúpula, corona y Wraparound
- Proudly Made in the USAMade in USA
- Free US shipping over $35Free ship $35+
- 30-day satisfaction guarantee30-day guarantee
- Ships in 1–2 business daysShips in 1–2 days
Tu gorra tiene rango. Shapers Image te respalda.
La mayoría de los casilleros guardan una gorra. Este guarda todo un escuadrón: la gorra de gala reservada para ceremonias, la gorra de servicio que ha visto cada amanecer, la gorra de cadete con sus buenos recuerdos y la gorra estilo conductor que viaja en tren los fines de semana. Cada una vale la pena conservarla, y cada una merece el tratamiento completo. Así que el Military Multipack se presenta al servicio: un moldeador de cúpula, un inserto de media corona y un inserto envolvente. Cúpula, frente y costados, todo cubierto. Ahora el pase de lista es un placer. Ningún panel se queda atrás.
El Military Multipack de Shapers Image despliega un escuadrón completo de soporte en gorras de estilo militar, del ejército, de cadete y de conductor, porque una gorra con rango merece la alineación completa. Dentro del paquete recibes un Dome Panel Shaper, un Half Cap Insert y un Wraparound Insert. El de cúpula llena la parte superior, el de media corona mantiene el frente erguido y el envolvente respalda los costados. Cada línea en su lugar. Cada corona en perfecto orden.
Es el paquete para quien tiene más de una gorra en el casillero, o una gorra muy importante y el gusto por hacer las cosas bien. Cadetes, piensen en el campo de desfile. Conductores, piensen en el andén de las 7:42. Mantén tus gorras listas para el servicio, del cuartel a la base, y listas para la inspección cuando llegue la orden.
Lo que entrega el escuadrón completo
- Escuadrón completo, soporte completo: Cúpula, corona y costados. Ningún panel se queda atrás.
- Tres piezas en un paquete: Un Dome Panel Shaper, un Half Cap Insert y un Wraparound Insert.
- Con aro o sin aro: Usa las piezas con el aro interno (grommet) de tu gorra para un soporte completo de cúpula y corona, o sin él para una sensación más ligera y suave.
- Diseño ventilado para mayor frescura: Ventilaciones cortadas con precisión mantienen el aire en movimiento, para que te mantengas fresco bajo presión.
- La firmeza justa: Mantiene la línea y sigue siendo cómodo, en cualquier gorra y cualquier cabeza.
- Ligero, delgado, suave: Sin roces ni irritación, para que tu frente esté tan cómoda como luce tu gorra.
- Hecho para el campo: Úsalo y luego utilízalo para empacar y guardar tus gorras en formación.
- Del color de tu gorra y fácil de limpiar: Se funde con tu gorra. Límpialo con jabón suave, enjuágalo, déjalo secar al aire y reutilízalo de por vida.
¿Quién debería presentarse por el Multipack?
Cualquiera que quiera cubrir cada parte de una gorra militar, del ejército, de cadete o de conductor: cúpula, frente y costados. ¿Prefieres alistar una pieza a la vez? Empieza con el CapForm Pro Dome Combo o el MilitaryPro Half Cap Insert. ¿No sabes qué necesita tu gorra? Crown Match lo resuelve en dos preguntas.
Úsalo y luego déjalo puesto para empacar y guardar tus gorras en formación. Si la etiqueta de una gorra dice que es lavable, lávala solo a mano (nunca en la lavadora, y nunca una gorra con visera de cartón). Nuestra guía explica la rutina: cómo lavar una gorra a mano. Las normas de uniforme varían según la rama y la unidad, así que consulta las tuyas.
Mira cómo se coloca cada pieza: Dome Panel Shaper · Half Cap Insert · Wraparound Insert
Preséntate con el escuadrón completo. Pide el Multipack de Shapers Image y dale a cada gorra del casillero lo que merece. Conserva tu corona. Mantén la forma.
Se envía en 1–2 días hábiles · Garantía de satisfacción de 30 días · Envío gratis en EE. UU. en pedidos de más de $35 · Orgullosamente hecho en EE. UU. · Empresa propiedad de una mujer

- Military and army caps
- Cadet caps
- Conductor-style caps
- Includes 1 Dome Panel Shaper, 1 Half Cap Insert, 1 Wraparound Insert
- Slide the Shapers Image Dome Panel Shaper inside your cap so it fills the dome, then slide the Half Cap Insert between the sweatband and the inner front panels and curve the Wraparound around the sides.
- Press each piece gently so it follows the curve and sits snug and seamless. Level them, and forget they’re there.
- Wear it on duty, then leave it in to store or pack your cap.
Wipe your Shapers Image shaper with mild soap, rinse and air dry. Keep it away from dryer heat and heat presses.
Every Shapers Image shaper is soft, flexible, lightweight foam. Waterproof, hypoallergenic and non-toxic. Proudly made in the USA.
Orders ship in 1–2 business days. Free US shipping on orders over $35; under $35 it is a flat $5.99. International orders of $99 or more ship free. Duties and taxes, if any, are the buyer’s responsibility, so check your country’s rules.
30-day satisfaction guarantee: return unused items in their original packaging within 30 days for a full refund. Each item must come back complete, with every piece that came in it. Sale items are final sale.
Discounts: one discount per order, never combined. Free shipping is the only offer that applies together with a code. Shipping policy · Refund policy
One Dome Panel Shaper, one Half Cap Insert and one Wraparound Insert. Together they support the dome, the front and the sides of your cap, so the whole squad is covered in one pack, with no hunting for pieces.
No. Use the pieces with your cap's grommet for full dome and crown support, or without it for a lighter, softer feel. Both ways work, so go with whichever suits the cap in your hand.
That is the full squad, but it is your call. Use the pieces that suit the cap in your hand and keep the rest handy for the next one in the locker. Nothing in the pack goes to waste.
Uniform rules differ by service and unit, so check yours before you buy. What we can tell you is the job the pieces do: they keep your caps squared away and ready for inspection, whatever your standards say.
Yes. Leave the pieces in to pack and store your headgear in formation, so your caps come out of the duffel, the locker or the suitcase looking just as sharp as when they went in. One pack covers the whole squad.
Only if the tag says it is washable. Never wash collectible caps or caps with a cardboard visor. Hand wash and air dry with your Shapers Image shaper in; never use a washing machine or dryer. Full steps are in our guide, How to Hand Wash a Cap.
Pairs well with
Ships in 1–2 Business Days
Your Shapers Image order leaves our shop fast, ready for game day, duty or the weekend getaway.
Free US Shipping Over $35
Stock up for the whole rotation and shipping is on us.
30-Day Satisfaction Guarantee
Not happy? Return unused items in their original packaging within 30 days.
Join the Shapers. Honor your image.
First dibs on new Shapers Image shapers, cap-care tips that actually work, and 10% off your first order.
Shapers Image® makes hat shapers and crown inserts that keep your caps looking the way they did on day one: thin, soft, light enough to wear all day, and firm enough to hold the crown. Proudly Made in the USA. A proudly woman-owned American company.









