Your cap has rank. Treat it that way. Three pieces, zero slack.
One set of 3 inserts: dome, crown and wraparound
Shapers Image Military Multipack: Kuppel-, Kronen- und Wraparound-Einsätze
- Proudly Made in the USAMade in USA
- Free US shipping over $35Free ship $35+
- 30-day satisfaction guarantee30-day guarantee
- Ships in 1–2 business daysShips in 1–2 days
Deine Mütze hat Rang. Shapers Image gibt dir Rückendeckung.
In den meisten Spinden liegt eine Mütze. In diesem liegt ein ganzer Trupp: die Ausgehmütze für Zeremonien, die Dienstmütze, die jeden Sonnenaufgang erlebt hat, die Kadettenmütze mit ihren schönen Erinnerungen und die Schaffnermütze, die am Wochenende auf der Schiene fährt. Jede von ihnen ist ein Lieblingsstück, und jede verdient das volle Programm. Also meldet sich das Military Multipack zum Dienst: ein Kuppelformer, ein Half Cap Einsatz und ein Wraparound Einsatz. Kuppel, Front und Seiten, alles abgedeckt. Antreten macht jetzt Spaß. Kein Paneel bleibt zurück.
Das Military Multipack von Shapers Image schickt einen ganzen Trupp an Halt in Militär-, Armee-, Kadetten- und Schaffnermützen, denn eine Mütze mit Rang verdient die volle Aufstellung. Im Paket bekommst du einen Dome Panel Shaper, einen Half Cap Einsatz und einen Wraparound Einsatz. Die Kuppel füllt die Oberseite, der Half Cap hält die Front aufrecht und der Wraparound stützt die Seiten. Jede Linie sitzt. Jede Krone ist tipptopp in Ordnung.
Das ist das Paket für alle mit mehr als einer Mütze im Spind, oder mit einer sehr wichtigen Mütze und einem Sinn dafür, Dinge richtig zu machen. Kadetten, denkt an den Exerzierplatz. Schaffner, denkt an den Bahnsteig um 7:42. Halte deine Mützen dienstbereit, von der Kaserne bis zum Stützpunkt, und bereit für die Inspektion, wenn der Befehl kommt.
Was der ganze Trupp leistet
- Ganzer Trupp, voller Halt: Kuppel, Krone und Seiten. Kein Paneel bleibt zurück.
- Drei Teile in einem Paket: Ein Dome Panel Shaper, ein Half Cap Einsatz und ein Wraparound Einsatz.
- Mit oder ohne Grommet: Nutze die Teile mit dem Grommet deiner Mütze für vollen Halt von Kuppel und Krone, oder ohne für ein leichteres, weicheres Gefühl.
- Belüftetes Design: Präzise geschnittene Lüftungsöffnungen halten die Luft in Bewegung, damit du auch unter Druck einen kühlen Kopf behältst.
- Genau die richtige Festigkeit: Hält die Linie und bleibt bequem, bei jeder Mütze und jedem Kopf.
- Leicht, dünn, glatt: Kein Reiben, kein Scheuern, damit sich deine Stirn so gut anfühlt, wie deine Mütze aussieht.
- Gebaut für den Einsatz: Erst tragen, dann damit deine Kopfbedeckungen in Formation einpacken und aufbewahren.
- Farblich abgestimmt und leicht zu reinigen: Fügt sich in deine Mütze ein. Mit milder Seife abwischen, abspülen, an der Luft trocknen und ein Leben lang wiederverwenden.
Wer sollte sich fürs Multipack melden?
Alle, die jeden Teil einer Militär-, Armee-, Kadetten- oder Schaffnermütze abgedeckt haben wollen: Kuppel, Front und Seiten. Lieber ein Teil nach dem anderen rekrutieren? Starte mit der CapForm Pro Kuppel-Kombi oder dem MilitaryPro Half Cap Einsatz. Unsicher, was deine Mütze braucht? Crown Match braucht nur zwei Fragen.
Trag sie und lass sie danach drin, um deine Mützen in Formation einzupacken und aufzubewahren. Wenn auf dem Etikett einer Mütze waschbar steht, nur von Hand waschen (niemals in der Maschine, und niemals eine Mütze mit Pappschirm). Unsere Anleitung erklärt die Routine: wie man eine Cap von Hand wäscht. Uniformvorschriften unterscheiden sich je nach Teilstreitkraft und Einheit, also prüfe deine.
So kommt jedes Teil hinein: Dome Panel Shaper · Half Cap Einsatz · Wraparound Einsatz
Melde dich mit dem ganzen Trupp. Bestell das Multipack bei Shapers Image und gib jeder Mütze im Spind, was ihr zusteht. Behalte deine Krone. Bleib in Form.
Versand in 1–2 Werktagen · 30 Tage Zufriedenheitsgarantie · Kostenloser Versand innerhalb der USA ab $35 · Stolz hergestellt in den USA · Frauengeführtes Unternehmen

- Military and army caps
- Cadet caps
- Conductor-style caps
- Includes 1 Dome Panel Shaper, 1 Half Cap Insert, 1 Wraparound Insert
- Slide the Shapers Image Dome Panel Shaper inside your cap so it fills the dome, then slide the Half Cap Insert between the sweatband and the inner front panels and curve the Wraparound around the sides.
- Press each piece gently so it follows the curve and sits snug and seamless. Level them, and forget they’re there.
- Wear it on duty, then leave it in to store or pack your cap.
Wipe your Shapers Image shaper with mild soap, rinse and air dry. Keep it away from dryer heat and heat presses.
Every Shapers Image shaper is soft, flexible, lightweight foam. Waterproof, hypoallergenic and non-toxic. Proudly made in the USA.
Orders ship in 1–2 business days. Free US shipping on orders over $35; under $35 it is a flat $5.99. International orders of $99 or more ship free. Duties and taxes, if any, are the buyer’s responsibility, so check your country’s rules.
30-day satisfaction guarantee: return unused items in their original packaging within 30 days for a full refund. Each item must come back complete, with every piece that came in it. Sale items are final sale.
Discounts: one discount per order, never combined. Free shipping is the only offer that applies together with a code. Shipping policy · Refund policy
One Dome Panel Shaper, one Half Cap Insert and one Wraparound Insert. Together they support the dome, the front and the sides of your cap, so the whole squad is covered in one pack, with no hunting for pieces.
No. Use the pieces with your cap's grommet for full dome and crown support, or without it for a lighter, softer feel. Both ways work, so go with whichever suits the cap in your hand.
That is the full squad, but it is your call. Use the pieces that suit the cap in your hand and keep the rest handy for the next one in the locker. Nothing in the pack goes to waste.
Uniform rules differ by service and unit, so check yours before you buy. What we can tell you is the job the pieces do: they keep your caps squared away and ready for inspection, whatever your standards say.
Yes. Leave the pieces in to pack and store your headgear in formation, so your caps come out of the duffel, the locker or the suitcase looking just as sharp as when they went in. One pack covers the whole squad.
Only if the tag says it is washable. Never wash collectible caps or caps with a cardboard visor. Hand wash and air dry with your Shapers Image shaper in; never use a washing machine or dryer. Full steps are in our guide, How to Hand Wash a Cap.
Pairs well with
Ships in 1–2 Business Days
Your Shapers Image order leaves our shop fast, ready for game day, duty or the weekend getaway.
Free US Shipping Over $35
Stock up for the whole rotation and shipping is on us.
30-Day Satisfaction Guarantee
Not happy? Return unused items in their original packaging within 30 days.
Join the Shapers. Honor your image.
First dibs on new Shapers Image shapers, cap-care tips that actually work, and 10% off your first order.
Shapers Image® makes hat shapers and crown inserts that keep your caps looking the way they did on day one: thin, soft, light enough to wear all day, and firm enough to hold the crown. Proudly Made in the USA. A proudly woman-owned American company.









