Low profile. High standards. A clean front line, never a stiff one.
Comes in 4, 8 or 12 pieces
Shapers Image CapPro Low Profile Einsatz für Dad Caps und flache Fitted Caps
- Proudly Made in the USAMade in USA
- Free US shipping over $35Free ship $35+
- 30-day satisfaction guarantee30-day guarantee
- Ships in 1–2 business daysShips in 1–2 days
Low Profile. Hohe Ansprüche. Shapers Image.
Samstag, 16 Uhr. Der Grill brennt, der Campingstuhl steht draußen, und auf deinem Kopf sitzt die Cap, die du seit einem Reifen-Sale 2009 liebst: weich, verblichen und mit genau der richtigen Portion Attitüde. Du hast einen großartigen Geschmack bei Caps, und das sieht man. Der CapPro Low Profile von Shapers Image ist genau dafür geschnitten, dass es so bleibt. Er schmiegt sich hinter die vorderen Paneele, hält eine saubere Frontlinie und lässt das lässige Gefühl in Ruhe, sodass der Durchhänger nie einen Platz beim Grillfest bekommt. Du willst deine Cap, aufrecht.
Dieser Kronen-Einsatz ist für kleinere, flachere Kronen geschnitten: Dad Caps, Low-Profile-Fitteds und flache Snapbacks. Er gleitet hinter die vorderen Paneele, folgt der Rundung deiner Cap und hält den ganzen Tag eine saubere Frontlinie, ohne deinen lässigen Liebling in einen steifen, kastigen Bauhelm zu verwandeln. Form statt Steifheit. Deine Cap behält das Gefühl, das du liebst.
Stell ihn dir als guten Schneider für eine Cap vor, die nicht maßgeschneidert aussehen will. Niemand sieht ihn. Du vergisst schon nach einer Minute, dass er da ist. Deine Cap sieht einfach aus, als hätte sie einen richtig guten Tag, und du auch, beim Burgerwenden.
Größe: 11 1/8 in lang x 3 1/8 in hoch (28.3 x 7.9 cm).
Warum Dad-Cap-Fans ihn lieben
- Geschnitten für kleinere Kronen: Gemacht für Dad Caps, Low-Profile-Fitteds und flache Snapbacks, nicht von einer höheren Cap geliehen und auf das Beste gehofft.
- Form ohne Steifheit: Fest genug, um die Krone zu halten, flexibel genug, um deiner Cap und deinem Kopf zu folgen, sodass das lässige Gefühl bleibt.
- Leicht, dünn, glatt: Weich, abgerundet und sanft zur Stirn. Er scheuert und reibt nicht, und die meisten vergessen, dass er da ist.
- Heat-Release-Design: Die konturierte Kronenform lässt Freiraum, damit Wärme entweichen kann. Deine Cap behält ihre Form, und dein Kopf fühlt sich wohl.
- Erst tragen, dann einpacken: Trag ihn den ganzen Tag und lass ihn drin, wenn deine Cap in der Tasche mitfährt, im Regal liegt oder auf Reisen geht.
- Leicht zu reinigen: Mit milder Seife abwischen, abspülen, an der Luft trocknen, ein Leben lang wiederverwenden.
- Stolz hergestellt in den USA: Von einem amerikanischen Unternehmen im Besitz einer Frau, das auch die kleinen Dinge ernst nimmt.
Passt der Low Profile zu deiner Cap?
Wenn deine Cap tief und lässig auf dem Kopf sitzt, mit einer weicheren, flacheren Front als eine klassische Fitted, dann ja: Das ist dein Einsatz. Höhere, strukturiertere Krone? Lerne sein großes Geschwisterchen kennen, den CapPro Kronen-Einsatz, gemacht für Fitted- und Snapback-Caps. Immer noch unsicher? Zwei kurze Fragen mit Crown Match, und wir zeigen dir den richtigen.
Schau zuerst aufs Etikett: Wenn dort waschbar steht, nur von Hand waschen (niemals in der Maschine), und lass den Einsatz drin, während sie an der Luft trocknet, damit die Krone in Form trocknet. Unsere Anleitung erklärt die ganze Routine: wie man eine Cap von Hand wäscht.
So funktioniert es: Anleitungsvideo
Deine Alltags-Cap verdient ein Alltags-Upgrade. Hol dir 8 oder 12 Stück von Shapers Image und lass deine ganze Aufstellung von ihrer besten Seite aussehen. Pflege dein Image. Bleib in Form.
Versand in 1–2 Werktagen · 30 Tage Zufriedenheitsgarantie · Kostenloser Versand innerhalb der USA ab $35 · Stolz hergestellt in den USA · Frauengeführtes Unternehmen


- Dad caps
- Low profile fitted caps
- Low snapbacks
- Size: 11 1/8 × 3 1/8 in (28.3 × 7.9 cm)
- Slide your Shapers Image insert between the sweatband and the inner front panels of your cap.
- Press it gently into the crown so it follows the curve and sits snug and seamless. Level it, and forget it’s there.
- Wear it all day, then leave it in to store or pack your cap.
Wipe your Shapers Image shaper with mild soap, rinse and air dry. Keep it away from dryer heat and heat presses.
Every Shapers Image shaper is soft, flexible, lightweight foam. Waterproof, hypoallergenic and non-toxic. Proudly made in the USA.
Orders ship in 1–2 business days. Free US shipping on orders over $35; under $35 it is a flat $5.99. International orders of $99 or more ship free. Duties and taxes, if any, are the buyer’s responsibility, so check your country’s rules.
30-day satisfaction guarantee: return unused items in their original packaging within 30 days for a full refund. Each item must come back complete, with every piece that came in it. Sale items are final sale.
Discounts: one discount per order, never combined. Free shipping is the only offer that applies together with a code. Shipping policy · Refund policy
No. It follows the curve of your cap and your head, and the more you wear it, the more it blends in. It adds shape, not stiffness, so your cap keeps the relaxed feel you love. Think of it as a good posture coach, not a hard hat.
If the crown sits low and relaxed on your head and the front is softer and shallower than a classic fitted, it is low profile. Dad caps, low fitteds and low snapbacks usually qualify. This insert measures 11 1/8 in long by 3 1/8 in high, so hold it up to the front panels of your cap and see if it sits like it belongs.
Reach for the CapPro Crown Insert, made for fitted and snapback caps with a fuller front. It gives a taller crown the room it deserves. Not sure? Crown Match will sort it out in two quick questions.
It is light, thin and smooth with soft edges, so it will not rub or chafe. Most people forget it is there inside a minute, which is the nicest compliment an insert can get. Pop it in and enjoy your cap.
Both. Wear it all day, then leave it in to store your cap, pack it for a trip and hold its shape while it air dries after a hand wash. One small insert, a lot of good days, and a cap that looks as good in the evening as it did in the morning.
Only if the tag says it is washable. Never wash collectible caps or caps with a cardboard visor. Hand wash and air dry with your Shapers Image shaper in; never use a washing machine or dryer. Full steps are in our guide, How to Hand Wash a Cap.
Pairs well with
-
CapPro Crown Insert — Fitted & Snapback Baseball caps · Wear · Store · Travel From $15.99· 4 piecesPacks of 4, 8 or 12 · as low as $3.16 each

-
Web Shaper — Full Dome & Crown Baseball caps · Wear · Store · Travel From $19.99· 2 piecesPacks of 2, 4 or 6 · as low as $6.66 each

-
CapForm Pro Dome Combo — Baseball Caps Baseball caps · Wear · Store · Travel From $23.99· 3 piecesPacks of 3, 4 or 6 · as low as $6.66 each

-
MeshPro Insert — Trucker & Mesh Caps Trucker caps · Wear · Store · Travel From $14.99· 4 piecesPacks of 4, 8 or 12 · as low as $2.99 each

Ships in 1–2 Business Days
Your Shapers Image order leaves our shop fast, ready for game day, duty or the weekend getaway.
Free US Shipping Over $35
Stock up for the whole rotation and shipping is on us.
30-Day Satisfaction Guarantee
Not happy? Return unused items in their original packaging within 30 days.
Join the Shapers. Honor your image.
First dibs on new Shapers Image shapers, cap-care tips that actually work, and 10% off your first order.
Shapers Image® makes hat shapers and crown inserts that keep your caps looking the way they did on day one: thin, soft, light enough to wear all day, and firm enough to hold the crown. Proudly Made in the USA. A proudly woman-owned American company.















